 |
Spirotech Magnabooster 2 installation £150
Cheapest Magna Booster installer in the Leeds area £150
The SpiroTrap MagnaBooster² offers a completely universal unit suitable for vertical, horizontal or even diagonal installations. The unit delivers a simple and efficient way to remove all types of dirt, debris and sludge from central heating systems.
Fitted by British Gas
Features and Benefits:
- Easy to install and suitable for vertical, horizontal and even diagonal installations.
- Unique dual action removes both magnetic and non-magnetic dirt.
- Keeps heating systems running at their maximum efficiency.
- Proven energy efficiency by BSRIA.
- Cleaned in seconds with no need to remove the magnet or the unit from the system.
- Slim design constructed from robust brass (no service kits required).
- Available with 22mm or 28mm fittings (no isolation valves required).
-
INDUSTRY LEADING 20 year guarantee*
A new TWIST on the removal of dirt from heating systems.
The SpiroTrap MagnaBooster² offers a completely universal unit suitable for vertical, horizontal or even diagonal installations. The unit delivers a simple and efficient way to remove all types of dirt, debris and sludge from central heating systems.
So how does the MagnaBooster² work?
How to install
Installation/Operating instructions for the Spiro Trap MagnaBooster²
Installing the SpiroTrap MagnaBooster²
The SpiroTrap MagnaBooster² should be installed preferably before the components to be protected: i.e. Boiler, Pump etc.
- Drain down the central heating system.
- Fit the SpiroTrap MagnaBooster² preferably on the boiler return pipe work as near to the boiler as possible.
- The arrow on the unit indicates the direction that the water should flow through the unit.
- Measure & remove the section of pipe (68mm maximum) where the SpiroTrap MagnaBooster² will be installed.
- For installation on to rigid pipe work the Magnabooster² has been designed with this in mind and one of the internal pipe connections is longer than is normally required and acts as a slip socket.
- You can slide the pipe into the unit and then slide the unit across in the opposite direction and connect onto the pipe opposite.
- It is important that the pipe is fully inserted into this connection.
- Ensure the body of the unit is positioned vertically (see the drawings).
- Hand tighten the ring nut, and then tighten normally to achieve the final seal.
- Install the supplied drain valve to the bottom of the SpiroTrap MagnaBooster²: shut off the valve using the safety cap as the valve key, then screw the safety cap back on to the drain valve.
- The drain valve can be used to drain the system.
- Make sure that the drain valve is always accessible.
- Drain the SpiroTrap MagnaBooster² regularly; once a year is recommended.
-
Important never use the drain valve as a filling valve
Where can i buy the new magnabooster or magnabooster2 look in the cheap central heating online shop. Ring me for more details 07725 692699
Price Promise
Latest Blog Posts
Accepted Payment
Gas Safe 510546
